
Frozen or Burst Pipe? What to Do in the First Hour
When temperatures in Northeast Wisconsin drop well below freezing, water lines in exterior walls, crawl spaces, garages and unheated basements can freeze. Ice expands inside the pipe, and the pipe can split. Often the leak does not show up until the pipe thaws, and then water comes fast. What you do in the first hour decides how much of your home gets wet.
1. Shut off the water
Find your main shutoff valve. In most Fox Valley homes it is in the basement, where the water line comes through the foundation near the meter. Turn it clockwise until it stops.
Open a faucet on the lowest level of the house to drain pressure out of the lines.
If you cannot find the valve or it will not turn, call your city or village water utility. They can shut water off at the curb.
2. Make the area safe
If water is near outlets, cords, appliances or the electrical panel, stay out of it. Only shut off power at the panel if you can reach it without standing in water.
Watch the ceiling below the break. A ceiling that is sagging or bulging can be holding water and may come down, so keep everyone out from under it.
3. Document before you clean
Take photos and video of the broken pipe, the standing water, and anything that got wet, before you move or throw anything away. Then call your insurance company. Sudden pipe bursts are often covered by homeowners policies, but every policy is different, so ask what yours includes.
4. Start getting water out
If it is safe, use towels, a mop or a wet/dry vac on standing water. Never use a regular household vacuum on water.
Move furniture, area rugs, boxes and electronics out of the wet area. Put foil or wood blocks under furniture legs that cannot be moved.
Do not crank the heat way up to dry things out. Heat alone will not dry the inside of walls and floors, and it can speed up mold growth.
5. Check for other frozen pipes
If a faucet somewhere else in the house has little or no flow, that pipe may be frozen but not burst yet. Leave the faucet open and warm the pipe with a hair dryer, heating pad, or a space heater kept a safe distance away. Never use a torch or any open flame. If you cannot find or reach the frozen section, call a plumber.
Why drying matters more than what you can see
Water from a burst pipe runs down inside wall cavities, under flooring and into subfloors and insulation. A wall can feel dry on the surface while the framing behind it is still soaked, and mold can start growing within 24 to 48 hours. We use moisture meters and thermal imaging to find where the water went, then set up air movers and dehumidifiers and check the readings until everything is actually dry. Learn more about our emergency water extraction and structural drying services.
How to prevent a repeat
Keep the heat at 55°F or higher, even when you are away.
Open cabinet doors under sinks on exterior walls during cold snaps so warm air can reach the pipes.
Disconnect garden hoses, then shut off and drain outdoor spigots before the first hard freeze.
Insulate exposed pipes in crawl spaces, garages and attics.
On the coldest nights, let a faucet on an exterior wall drip.
Burst pipe? We can help 24/7
Fox Valley Restoration is IICRC certified, answers the phone 24/7, and bills insurance directly. We have handled burst pipe damage across the Fox Valley, including a blown pipe on Henry Street in Neenah. If drywall, flooring or cabinets have to come out, we are a licensed Wisconsin dwelling contractor and can handle the rebuild too. See our full water damage restoration services, or call 920-215-2594 any time.
.png)
.png)




Comments